HIGH PRESSURE LASER FUME COLLECTORS
Four models of fume collectors, ideal for laser marking, micro-cutting, micro-graving, micro-welding. Very compact, light, silent (60 to 64 db), easy to carry, they can be used in all types of working environment (workshop, production lines, cleanroom) and integrates easily into solutions proposed by integrators.
High pressure laser fume collectors
CBA-080/1200-HC-DSA
-
Main filter using exclusive CHIKO AIRTEC technology. Collects clogging particulates without causing early filter saturation.
-
Filter with activated carbon to eliminate odors.
-
High Performance filter.
-
Final filter : High Performance or HEPA.
-
Maximum filtration rate is 99.9% of particulates with a minimal diameter of 0.3 micron.
Collectors consist of four detachable parts, thus providing easy access to filters, as well as simple filter replacement and verification of filter status. They are designed for lasting use without prior maintenance. No maintenance is in fact necessary.
CBA-1000AT-HC-DSA-V1
-
Principal filter using a unique technology by CHIKO AIRTEC able to suck clogging particulates without filter early saturation.
-
Filter restoration system to increase filter lifetime.
-
Control panel: speed regulator (level 1 to 7), filter situation indication, anomaly indication.
-
Synchronization plug with the laser.
-
HEPA final filter for a clean air outlet.
-
Possibility to evacuate air outside.
CKU-060AT-ACC
-
Very small dimensions, ideal for very narrow spaces (264x264x502 mm).
-
At panel board: indication of saturation, or anomalies, speed control with 7 levels…
-
Synchronization plug for direct connection with laser applications.
-
Optimal satisfaction in terms of performance and cost for applications like laser marking and welding, with low dust emissions.
-
Pressure 2.5 times higher than the average of same-sized models.
-
Low energy consuming: 150W.
-
First filter with a special structure increasing the time before saturation.
-
Secondary filter with activated carbon removing odors.
-
Maximum filtration rate: 98 % for particulates ≥ 0.3µ .
SK-250AT-DS
 |  |
|
|---|---|---|
Main filter |
-
The SK-250-DS collector is designed for non clogging fine particulates and odours generated by laser marking and welding.
-
Pre-filter : High Performance 5 thickness polyester bag for elimination of the largest particulates. Capacity : 1 litre.
-
Cylindrical main filter with activated carbon incorporation.
-
Light indicator of bag and main filter saturation
Schematic representations
CBA-080-HC-DSA
CBA-1200-HC-DSA
CBA-1000AT-HC-DSA
CKU-060AT-ACC
SK-250AT-DS
Technical specifications
| Reference | CBA-080-HC-DSA | CBA-1200-HC-DSA |
|---|---|---|
| Voltage | 220V-240V | 220V-240V |
| Frequency | 50/60Hz | 50/60Hz |
| Power supply | 250W | 1200W |
| Intensity | 4.3~2.1A | 6.0A |
| Maximal air flow | 1.50m3/min | 4.3m3/min |
| Maximal static pressure | 7.0kPa | 10kPa |
| Weight | 18kg | 25kg |
| Dimensions (LxWxH) | 260x477x275mm | 400x600x450mm |
| Reference | CBA-1000AT-HC-DSA-CE | CKU-060AT-ACC-CE |
|---|---|---|
| Power supply | 220V-240V | 220V-240V |
| Voltage | 50/60Hz | 50/60Hz |
| Intensity | 450W | 150W |
| Frequency | 6.0A | 3.3A |
| Air flow | 3.2m3/min | 2.4m3/min |
| Static pressure | 9.5kPa | 1.8kPa |
| Weight | 28.5kg | 21.5kg |
| Dimensions (LxWxH) | 360x404x491mm | 264x264x502mm |
| Reference | SK-250AT-DS-CE |
|---|---|
| Power supply | 220V-240V |
| Voltage | 50/60Hz |
| Intensity | 250W |
| Frequency | 5A |
| Air flow | 4.3m3/min |
| Static pressure | 2.05kPa |
| Weight | 23kg |
| Dimensions (LxWxH) | 370x395x365mm |
To choose a fume collector or dust extractor according to their technical specifications, please click on the link below.
